How to Rot Wood Faster | Sugar or Potassium Nitrate

Nowadays, the wood used to build house are not durable anymore. But not all the woods are the same; some rot faster than others for various reasons. We will tell you how to rot wood faster in this post.

There are many ways to do it. The simplest is by using water; you can simply pour some water into it. People often use this method. However, not only water can be used in this matter. You can also use some chemicals or some acid to break down the cellulose to do the same. To speed up the process, you have to be patient and wait.

Methods to Speed Up Wood Rotting

1. Granulated Sugar Method

Wood contains moisture, when the moisture content decreases, it is said to be “dry”. When the moisture content increases, it is said to be “wet”. Yes, wood can rot faster when it is wet. However, moisture content of only 20% is required to sustain most types of fungus growth. Wet wood is generally more susceptible to insects and decay-causing bacteria than dry wood. The moisture content of less than 20% is considered “dry”.

Here’s how you do it:

  1. Mix two parts of water with one part of sugar.
  2. Pour the mixture into a spray bottle, and spray it onto the wood until it’s saturated.
  3. Let the wood sit in the sun for 6 to 8 weeks. It will cause the rot.

Why does this happen? Sugar attracts water because it is hyproscopic. When you spray sugar water onto wood, the sugar water will pull the water out of the wood. After 6 to 8 weeks of sugar water exposure, the wood will be so filled with sugar water that it will start to rot.

2. Potassium Nitrate Method

Potassium nitrate is a white crystalline salt. It acts as a reducing agent and reduces the cellulose to its constituent glucose, which carbonates and forms a brownish coating.

Here’s how you do it:

  1. Make holes in wood with a drill.
  2. Put potassium nitrate crystals in holes.
  3. Pour warm water into it.

Note: You can also use brush killers that contain potassium nitrate (such as Spectracide’s brush killer).


How to Detect Rot in Wood?

Several different signs can identify it. For Example:

  • The most common indicator is known as checking, which is a series of dark lines that appear on the surface of the wood. It can be caused by rain, flooding, or even a hole in the roof that leads to a buildup of water. The wood swells but cannot handle the pressure, causing a soft spot.
  • A crack or split on wood’s surface. This is the result of swelling that has taken place inside the wood. The outside layers of the wood swell and crack, but since the inside layers have not yet swollen, a split or crack results.
  • A mouldy smell coming from a piece of wood is another indicator of wood rot.
  • Look for the presence of termites. Examine the presence of termite droppings on the surface. In addition, if the wood has been chewed, then the markings produced by the termites can be matched with the pattern of the mandibles of the termites.


What Challenges does Wood Rot Cause?

Wood rot is a fungus, decay, or mould which eats away at the wood. It causes structural damage to wood, weakening it and decreasing the life of the wood. Wood rot can also cause severe damage to the home. It is the cause of many house fires, the loss of home value, and a safety hazard. You can prevent wood rot through good maintenance of the wood. Cleaning, painting, and waterproofing are all ways of maintenance that can prevent wood rot.

If a tree is infected, it can cause major structural damage to a building. For example, if a tree is infected, it can fall on your house and cause serious damage. In fact, in the worst-case scenario, it can cause your house to collapse. If you want to know about the types of wood rot and how to prevent them, you should visit our blog.


[su_youtube url=”” width=”200″ height=”200″]


How does Potassium Nitrate Rot Wood?

Potassium nitrate is a highly reactive chemical that can cause a reaction if combined with other substances. In the case of wood, potassium nitrate mixed with water can cause the wood to rot and decompose. Wood’s cellulose composition is the reason it is almost always susceptible to rot. Wood is composed of lignin, cellulose and the minerals in wood.

Lignin and cellulose are the fundamental parts of wood, and when they are combined with potassium nitrate, they can cause a chemical reaction that breaks down the wood’s composition. The wood’s ability to hold itself together and its structural stability decrease, which causes the wood to decompose. Potassium nitrate is used widely in many products, including fertilizers and explosives, but it can also be used as a tool in the natural decomposition of wood.


How do You Slow Down Rot?

Rotted wood and timber must be treated to prevent the spread of wood rot. Take up the area of wood rot and treat it with fungicide. Some wood preservatives can be used as a protectant for exterior wood. However, as long as it is not too wet, you can treat the area with a fungicide. You can also use boric acid to prevent rotting.


What Chemical will Destroy Wood?

The chemical that destroys wood is sodium hydroxide. It is a strong base and has very corrosive effects on wood. If it comes in woods contact, the fibres start to break up, dissolve and swell. The wood loses its strength; the wood fibres start to lose their colour. This works to your advantage because the wood fibres are relatively weak and can be easily torn apart.


[su_youtube url=”” width=”200″ height=”200″]



The most important thing to remember is that different woods rot at different rates, so you will have to experiment to see how quickly your wood will rot. We hope the article on how to rot wood faster was helpful! Hopefully you are ready to tackle your next wood project.



Related Posts: